RT info:eu-repo/semantics/article T1 Pareto optimal weighting factor design of predictive current controller of a six-phase induction machine based on particle swarm optimization algorithm A1 Fretes Acevedo, Héctor Daniel A1 Rodas Benítez, Jorge Esteban A1 Doval Gandoy, Jesús A1 Gómez Valenzuela, Víctor Sebastián A1 Gómez Redondo, Nicolas Alberto A1 Novak, Mateja A1 Rodríguez, José A1 Dragičević, Tomislav A2 Universidad Nacional de Asunción. Facultad de Ingeniería K1 Cost function K1 Current control K1 Guidelines K1 Power electronics K1 Stators K1 Tuning AB Finite-set model predictive control (FS-MPC) as predictive current control (PCC) is considered an exciting option for the stator current control of multiphase machines due to their control flexibility and easy inclusion of constraints. The weighting factors (WFs) of PCC must be tuned for the variables of interest, such as the machine losses x−y currents, typically performed by trial-and-error procedure. Tuning methods based on artificial neural network (ANN) or the coefficient of variation were proposed for three-phase inverter and motor drive applications. However, the extension of this concept to the multiphase machine application is not straightforward, and only empirical procedures have been reported. In this context, this article proposes an optimal method to tune the WF of the PCC based on the multiobjective particle swarm optimization (MOPSO) algorithm. A Pareto dominance concept is used for the MOPSO to find the optimal WF values for the PCC, comparing parameters of root-mean-square error of the stator tracking currents. The proposed method offers a systematic approach to the WF selection, with an algorithm of easy implementation with direct control over the size of the search space and the speed of convergence. Simulation and experimental results in steady-state and transient conditions are provided to validate the proposed offline tuning procedure of the PCC of a six-phase induction machine. The improvements of RMSE can be more than 500% for x−y subspace, with minor effect in α−β subspace. Finally, the proposed method is extended to a more complex cost function, and the results are compared with an ANN approach. PB Institute of Electrical and Electronics Engineers SN 2168-6777 YR 2021 FD 2021-07-27 LK http://hdl.handle.net/20.500.14066/4913 UL http://hdl.handle.net/20.500.14066/4913 LA eng NO Fretes, H., Rodas, J., Doval-Gandoy, J., Gomez, V., Gomez, N., Novak, M., Rodriguez, J., & Dragičević, T. (2021). Pareto Optimal Weighting Factor Design of Predictive Current Controller of a Six-Phase Induction Machine Based on Particle Swarm Optimization Algorithm. IEEE Journal of Emerging and Selected Topics in Power Electronics, 10(1), 207-219.https://doi.org/10.1109/JESTPE.2021.3100687 NO Nota de versión del documento publicado.La versión publicada es la versión aceptada, revisada por pares (Accepted Manuscript).La versión editorial definitiva (Published Journal Article) se encuentra disponible en el sitio de la revista, cuyo identificador DOI es: https://doi.org/10.1109/JESTPE.2021.3100687. NO Consejo Nacional de Ciencia y Tecnología DS MINDS@UW RD 22-nov-2026